Fire Door Retainers Hold Fire Doors Open Hygienically

Friday 3rd April 2020

With concerns of the coronavirus being spread through contact with door handles and hand plates, many companies and health care settings are looking for solutions to hold fire doors open; reducing the need to touch door handles, without compromising fire safety.

Fire door retainers, such as Dorgard Original and Dorgard SmartSound, hold fire doors open legally and hygienically.

Dorgard Fire Door Retainers offer easy-to-install solutions that can be fitted to an existing fire door in around ten minutes by your own handyman, without the need to book an engineer to install. By fitting your fire doors with either the Dorgard Original or the upgraded version Dorgard SmartSound, you can hold fire doors open legally and eliminate the need to open the door using the handle once the Dorgard plunger has been depressed. This reduces the risk of germs and viruses spreading. The Dorgard will let the fire door close automatically when a fire alarm sounds, as the devices recognise the sound of a fire alarm.

For settings where at night time the doors should be closed, the Dorgard can be programmed to self-close at a specific time.

Call us today to speak with a customer service adviser on 0800 433 4289.

Angie Dewick-Eisele

Director

Angie Dewick-Eisele is co-founder of Safelincs Ltd, one of the leading fire safety providers in the UK. Angie was Marketing Manager for many years and as Director is these days responsible for Content Management.

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

Safelincs supports Buses 4 Homeless

Thursday 30th January 2020

Buses 4 Homeless is a social enterprise that was set up by Dan Atkins with a mission to provide 14,600 nights of sleep a year for the homeless. This exciting project, offering a three-month rehabilitation programme to vulnerable homeless people, is run from four refurbished double-decker buses and aims to re-engage homeless people back into the community.

Dan contacted Safelincs to ask for advice about fire safety and when we heard about the project we decided to get involved and donate a state of the art Zerio Plus wireless fire detection system, fire extinguishers, and a fire escape ladder. Installing the equipment enabled the first guests to be welcomed onto the project just before Christmas. Dan Atkins said “I picked up the phone and called Safelincs, spoke about the project and what we are doing. Everyone at Safelincs has been so supportive”. Dan went on to say “it is humbling to have such support”.

The buses provide four very distinct areas for the guests including sleeping accommodation, dining, wellbeing, and education. Each individual has the opportunity to work on their own specific areas and issues that led them to become homeless, learn new skills and help them secure employment. The programme offers the opportunity of long term mentorship to underpin long term success. We wish Dan and his team every success.

Buses 4 Homeless fitted with Zerio Plus wireless alarm panel and water mist extinguishers

Angie Dewick-Eisele

Director

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

Double Awards for Safelincs

Wednesday 9th October 2019

Safelincs receiving Employer of the Year 2019 East Lindsey Business Award

Safelincs Ltd have been named Employer of the Year and been given a second award for Excellence in Customer Service in the ELBA 2019 business awards. These two awards are testimony to the great team at Safelincs. Harry Dewick-Eisele, MD, said ‘We are incredibly proud of our team and these two awards are down to our great team work and ethical business practices’. He went on to say ‘we believe our success is in selecting the right staff from the start, giving them a comprehensive induction period and then involving them in all aspects of the business’.

Safelincs receiving Excellence in Customer Service 2019 East Lindsey Business Award

These two awards follow continued growth for the company, bucking the trend by growing 30% year on year for the last four years. Ensuring that staff are well trained, have a voice within the company and are empowered to provide the best customer service are all contributing factors for Safelincs’ success. With a product range of over 6000 products Safelincs can offer comprehensive fire safety solutions to customers of all sizes and work with organisations such as Eton College, Empire Cinema, the NHS, as well as schools, colleges and universities.

Angie Dewick-Eisele

Director

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

How are fire doors rated?

Thursday 26th September 2019

Fire doors are given ratings which relate to the length of time the doors will give protection against a fire breaking through the door. Typial ratings for fire doors look like this: FD30, FD30s, etc. FD stands for fire door, and the number stands for the minutes of protection the door is certified for, in this instance 30 minutes protection. The ‘s’ after the number rating indicates that the fire door has not only intumescent fire door seals but also brushes to prevent the spread of cold smoke.

Fire doors form an essential part of your fire protection plan, slowing down and compartmentalising a fire. As such, you must get the right fire door in the right place; after all, it could save lives.

If you would like to gain a deeper understanding of fire door ratings, read our article ‘Fire Door Ratings: FD30 or FD60?‘ to find out more. Alternatively our online fire door configurator will guide you seamlessly through the process of purchasing a fire door.

Angie Dewick-Eisele

Director

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

Safelincs team up with Evie Toombes, para show jumper and ambassador for hidden disabilities

Thursday 6th June 2019

Safelincs are proud to be able to help support Evie Toombes with her quest to fund a medical horse box. Evie is an inspirational teenager with spina bifida and is a para show jumper from Skegness, Lincolnshire. She is also an ambassador for hidden disabilities and visits schools to talk to children about her hidden disability in the hope that she will give confidence to other children to speak about their problems.

Over the past few years Evie’s condition meant that she was unable to tolerate food and as a result lost a lot of weight and now needs to be fed through a tube into her stomach. Her condition also affects her legs, bladder and bowel.

Evie and Daisy the Horse aka 'High Offley Business Centre' — Evie with Daisy aka ‘High Offley Business Centre’

Ill health and numerous hospital visits started to make it very difficult for Evie to continue to compete, so two years ago Evie embarked on a plan to fund a medical unit horse box which would give her the ability to go to shows with all her medical equipment.

“Thank you for your support towards the purchase of my medical horse box, the security of having a vehicle that is safe and well equipped enough to deal with the current medical needs I face (that has landed me in hospital at least once a month every month for 15 months) is truly incredible,” said Evie Toombes.

Riding gives Evie freedom from her health issues and the bond with her horse and ponies gives her a boost when she is feeling unwell. Evie has won several trophies. We wish Evie every success in her future competitions.

Angie Dewick-Eisele

Director

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

Time to Change, Safelincs sign the pledge

Wednesday 13th February 2019

Signing the “Time To Change” pledge is just one of the many steps that Safelincs have taken to make changes towards how people feel about mental health.

We have trained two Mental Health First Aiders (MHFA) and have implemented a confidential system for staff to contact them and ask for support. We have also appointed a Well-Being Team. This team of four staff are planning and implementing activities throughout the year that open up conversations about mental health.

Harry Dewick-Eisele, MD, and Stuart Baxter, Commercial Development Manager, signed the pledge to demonstrate that top management are taking the issue of mental health seriously. Harry Dewick-Eisele said ‘We want talking about mental health and any related issues to be as commonplace as talking about a cold or a broken leg’. All the management team at Safelincs are onboard with this initiative and we have an open door policy and staff can pop in to a manager’s office at any time to talk.

The “Time To Change” website has lots of resources of which we have already used several, such as the Conversation Starter and handouts to get conversations going. We will be engaging staff in a number of activities over the year to ensure that talking about mental health becomes the norm at Safelincs.

Angie Dewick-Eisele

Director

Latest Posts by Angie Dewick-Eisele

Emergency Lighting Requirements1st August 2024
What to do if my Carbon Monoxide alarm goes off?19th March 2024
What is BAFE certification?28th March 2023

Nest Product Generations – How to Identify Your Products

Thursday 2nd March 2017

It is well known that electronic technology advances very quickly, with products being outdated and replaced by a newer version every year. More and more frequently these subsequent versions of the same product are being called ‘generations,’ such as a ‘5th gen iPod.’ Nest Labs’ range of ‘smart home’ products is no exception to this trend and the oldest two have already undergone a few iterations of redesign and improvement.

This guide has been written to help you quickly and easily identify which generation your Nest Products belong to.

Nest Protect

	1^st Generation	2^nd Generation
Edges	Straight Edges	Rounded Edges
Backplate	Square	Circular
Battery Door	No Battery Door	Battery Door
Serial Number	05A or 05C	06A or 06C

Model Number

Open the Nest app on your phone and tap Protect at the bottom, tap the Settings gear at the top followed by the alarm you’re interested in, and then go to Technical Info. If it says your model is Topaz-1.x then you have a First Generation, while Topaz-2.x denotes the Second Generation alarm.

Nest Learning Thermostat

	2^nd Generation	3^rd Generation
Colours	Stainless Steel	Stainless Steel, Copper, Black, White
Appearance
	7cm screen diameter 320 320px resolution	8.25cm screen diameter 480 x 480px screen
Base
	Yellow spirit level Rectangular Display connector	Blue spirit level Oval display connector
Heat Link
	One status light 10cm height and width	3 status lights 11cm height and width

Nest Cam

	Indoor	Outdoor
Colour	Black	White
Appearance
Differentiating Features	Securely stream 1080p video to your phone, tablet or laptop Various positioning options No installation – simply plug into power and set up via phone app Compatible with standard camera mounts and tripods	Weatherproof camera nad cables Magnetic mount with metal plate for wall attachment Night vision Clear 24/7 video with 130 degree viewing angle

Hushing Interlinked Smoke Alarms

Tuesday 3rd January 2017

Interlinked smoke alarms are becoming more and more popular as they quickly alert you to the event of a fire across larger houses, where there is a risk that you might not hear an alarm going off in the kitchen when you are, for example, in a bedroom upstairs.

Whether connected to each other with wire or wirelessly interlinked through radio frequency, interlinked smoke alarms allow you to connect multiple units – including different types of detectors – which will all sound at the same time when a single alarm detects a potential fire. The heat alarm in the kitchen, the ionisation alarm in your home office, and the specialist strobe and vibration alarm in your elderly parents’ bedroom, for example, will all go off at the same time, if just one alarm is triggered by fire.

Most of us are familiar with the test button on smoke alarms which allows residents to test their alarms regularly, to ensure the components are working and the power supply, whether battery or mains power, is working. On top of this, however, many alarms have a “hush” button which allows you to silence an alarm that has gone off, for example, due to burnt toast.

So how do hush buttons work when you have several interlinked alarms?

It’s easy to assume that, as they are all connected, hushing one alarm will silence all of them, but it is equally logical that only the unit on which you pressed the hush button should be silenced – after all, you don’t want people to assume it was a false alarm if there really is a fire raging downstairs.

Interestingly, not all interconnecting smoke alarms hush in the same way. Here is an overview explaining the different approaches employed by the three main smoke alarm manufacturers in the UK.

For Kidde smoke alarms, the originating alarm (the unit which detected a potential fire and triggered all of your units) will have its warning light flash faster than all other units while the alarm is sounding – enabling you to identify the smoke alarm that caused the alarm. Pressing the hush button on ANY unit will silence the ENTIRE network.

If you have interlinking Ei Electronics smoke alarms, only the originating unit’s hush button will be able to silence the ENTIRE network. The other units in the circuit can be individually silenced. To identify the originating unit you need to look for the alarm whose warning light is flashing every second, compared to every 40 or so seconds on the other units.

FireAngel smoke alarms, however, deploy an improved silencing protocol. If you hush the originating smoke alarm then, as with the other brands, ALL connected units will be silenced. However, if you hush any other unit, the ORIGINATING alarm will continue to sound but ALL OTHER units will be silenced. This allows you to quickly identify the originating alarm which is very helpful both in case of a false alarm or a real emergency.

If you require support selecting the best smoke alarm system for yourself, please contact the friendly Safelincs support team either by emailing support@safelincs.co.uk or by ringing 0800 612 6537

What causes “chirping” and false alarms in smoke alarms?

Wednesday 3rd February 2016

This post was written in 2016 and a more recent version exists. Please read our new guide to troubleshooting beeping smoke alarms.

hoovering-alarm If your smoke or heat alarm is beeping or “chirping” in the middle of the night with no obvious reason, you may begin to see it as an annoyance rather than a life saving device.

False alarms and chirping are often alerting you of problems that require attention. There are a number of checks that can be done to help find the cause before seeking further help from the manufacturer or retailer. Below is a step-by-step guide to the possible causes and solutions for false alarms and chirping; however, always refer to the manufacturer’s instructions for your exact smoke or heat alarm model. Additional care should be taken with mains powered alarms, as interference with the alarm can cause electrocution.

1) Are you using the correct type of smoke alarm?

There are three main types of domestic alarms available on the market:

Ionisation Smoke Alarms – Slightly quicker at detecting fast flaming fires than other technologies but usually only installed in upstairs landing areas. If installed near a kitchen, where the occasional toast might get burned, ionisation alarms can cause false alarms. The installation of this alarm near sources of smoke is one of the key reasons for false alarms in daytime.

Optical Smoke Alarms – Slightly quicker at detecting slow smouldering fires that can originate from upholstery type materials and over-heated wiring. Suitable to be installed in bedrooms, living rooms and downstairs hallways. These are fairly ‘toast-proof’ and can be installed near kitchens (not in kitchens, though).

Heat Alarms – Activate when the temperature inside the room reaches a certain trigger level or if the heat in a room rises very quickly. These are ideal in kitchens and garages, as they do not get triggered by fumes. Please note that a heat alarm only covers a small area, so larger kitchens will require several heat alarms.

All types of alarm will sound in the event of a fire; however, understanding more about each sensor technology helps you to select units that are least likely to cause false alarms. Alarms placed in the wrong location will on the other hand cause false alarms, eg if you have a smoke alarm located in the hallway and this sounds each time you use the toaster or boil vegetables, it is likely that you have an ionisation smoke alarm installed rather than an optical.

2) Is the alarm in the optimum position?

The user manual for your smoke or heat alarm will provide advice on where to avoid positioning your alarm on the ceiling. Below are some examples of locations to avoid placing your smoke or heat alarm:

Near fluorescent lights – as electronic “noise” can cause false alarms
In front of air supply ducts for heating or air conditioning, or near ceiling fans
Directly above cookers/toasters/kettles (heat alarm) – although heat alarms are designed not to cause false alarms from cooking fumes, they should not be installed directly above cooking appliances
Within 0.9m (3ft) of the door to a bathroom or shower room (smoke alarm) – steam can cause false alarms

3) Is there dust and/or insects inside the alarm?

Smoke alarms contain a sensor which is used to detect a fire. Over time, dust can build up or small insects/flies can crawl inside the unit, obstruct the sensor and eventually cause false alarms. Cleaning your alarm helps to remove anything that could be blocking the sensor. Wipe the outside of the alarm with a damp cloth, then using a vacuum nozzle or a hair dryer (set on cold), to suck or blow through the openings of the alarm.

4) Have you been decorating nearby?

If decorating, especially sanding, has recently taken place, dust particles or paint fumes could have entered the sensor chamber, causing damage to the unit and therefore causing false alarms. It is recommended to temporarily cover the alarm whilst decorating. Some alarms are supplied with a protective cover, so keep hold of this after installation for any future use. If you suspect decorating may have affected your alarm, try cleaning the unit as described above.

5) Is the temperature causing the alarm to beep?

Smoke alarms have an optimum operating temperature and it is important to ensure that your alarm is not subjected to temperatures above or below these thresholds. Typically, the operating temperature for a smoke alarm is between 0 ˚C to +40 ˚C. If the alarm is positioned where it may experience blasts of hot or cold air e.g. close to a front door, or the ambient room temperature is not constant e.g. in attics, this is when false alarms can occur. It may be necessary to reposition your alarm.

6) Is the alarm at the end of its life?

Each smoke and heat alarm should have a sticker located on the edge or the back of the unit indicating a replace-by date. This is usually ten years after manufacture. If your alarm starts chirping or regularly sounds falsely, it could mean that the alarm is close to, or has reached the end of its life. Check the date to see if the alarm is due to be replaced.

7) Is there a problem with the mains supply?

Mains powered smoke alarms can usually be identified by two LEDs located on the face of the unit. One LED flashes red approximately once a minute to indicate that the unit is operating correctly. The second LED should be constantly green to indicate that mains power is present. If the green LED is not present, this could mean that there is an issue with the mains power getting to the alarm. If needed, advice should be obtained by a qualified electrician.

8) Is the battery running low?

Chirping every 30-40 seconds is generally an indication that the battery is running low. If your smoke or heat alarm has a replaceable battery, try replacing the battery with a brand new one. It is recommended to change the batteries in your smoke and heat alarms every 12 months. Changing your battery before it runs low helps to overcome the annoying chirps at night. Change the batteries when the clocks are changed forward or register for a free email reminder service.

Many smoke and heat alarms are now fitted with a sealed lithium battery, designed to last the life of the alarm. These batteries are not accessible for replacement and so if your alarm starts chirping but has a non-replaceable battery, the alarm may have reached the end of its life. Batteries running low apply to both solely battery powered alarms as well as mains powered units with a back-up battery.

9) Is there another alarm nearby?

If you have tried all the above and you can still hear chirping, the final check is to see if there is another alarm or device within the same area that could be causing the chirp. It is easy to associate chirping with smoke and heat alarms and forget that other devices e.g. carbon monoxide detectors could also contain a battery that is running low.

Safelincs are happy to provide information regarding your smoke and heat alarms. For more information, you can also visit our Smoke Alarm Help Guides page, or contact our customer services team.

Evacuation Chair Training Requirements

Monday 10th August 2015

As with any other item of fire safety equipment, there is a requirement to deliver training. If an organisation determines that an evacuation chair is required sufficient training should be provided. Evacuation chair training ensures that nominated staff members can act quickly and confidently when called to do so. Evacuation chair training is therefore required to fulfil what HSE identify as organisations’ ‘duty to provide a means of escape for disabled people’.

Evacuation chair training in a a classroom — Training can be delivered to groups of up to 4 delegates

Is evacuation chair training a legal requirement?

Yes, where evacuation chairs are installed, staff must legally be trained to use the equipment. This is required by the Equality Act 2010, which recognises the difficulties that some individuals may face during an evacuation. Under this act, organisations are responsible for providing means for safe evacuation of every building occupant. This includes both installing evacuation chairs where required, and training enough staff to use them. According to the Provision and Use of Work Equipment Regulations (PUWER) 1998, equipment provided for use at work can be ‘used only by people who have received adequate information, instruction and training.’ This is essential for evacuation chairs, which are considered to be medical equipment. Misuse in a stressful evacuation situation puts the operator, the chair user, and those around them at risk of injury.

Why is evacuation chair training required?

There are legislative requirements for evacuation chair training. The qualification ensures the safety and confidence of both the chair user and the operator. If not used correctly, lives could be put at risk. Training is therefore essential to ensure the competence of the chair operator, who has undertaken a significant personal responsibility to evacuate a friend, colleague, or visitor to safety in an emergency.

Evacuating a pregnant lady in an evacuation chair — Individuals may need support to evacuate for a variety of reasons

Who should receive training?

Due to the significant responsibility placed on individuals who receive training, it is important to ensure that they meet the following criteria:

They are a willing volunteer – no one should be forced to take on this responsibility.
They are responsible – staff members selected should be sensible, reliable, and understand the importance of their role.
They work in the vicinity of the person identified as needing support. It must be practical and possible for the trained member of staff to get to both the chair and the chair user in an emergency (e.g., they should work on the same floor).
They are physically able. Nominees trained to use the chair don’t need to be incredibly strong, but mobility and stamina might be required.
There should be enough individuals trained to cover shift patterns and absence from work.

How often should training be refreshed?

Once an individual has successfully completed an evacuation chair training course, they can operate that model of chair for up to 3 years. After this time, refresher training is legally required. There are several other reasons that evacuation chair training might need to be carried out again. If a member of staff who is trained to use the chair leaves, is promoted, or otherwise becomes unable to operate it, a replacement member of staff must be trained. Similarly, if a new FRA, PEEP, or fire drill identifies an individual who would not be able to evacuate, and an additional chair is installed, another member of staff must receive evacuation chair training.

evacuation chair training on a staircase — Training provides delegates with the necessary skills and confidence to support safe evacuation

How many people should receive training on your evacuation chairs?

At a minimum, there must be one evacuation chair installed for every person who would need support to evacuate. For every chair installed, at least one member of staff must be trained and confident to operate it. However, to ensure the safety of all building users when trained staff are unavailable (on annual leave, off sick, or moved to a different office), it is sensible to train additional members of staff where possible. Enrolling a member of staff in a ‘Train the Trainer’ course can be a cost-effective way for training to be dispersed throughout your organisation.

Fulfilling your organisation’s evacuation chair training requirements

For more information about the importance of training and maintenance for evacuation chairs visit our help guide. Book an evacuation chair training course with Safelincs to equip your employees with comprehensive theoretical and practical training from a fully qualified and experienced trainer. These on-site evacuation chair trainings courses are available nationwide, and suitable for up to 6 participants per course.