Tag: p50

Extinguisher run over by van – still pressurised!

Thursday 17th October 2013

We were always convinced that our P50 service free extinguishers made from a Kevlar-type aramid were almost in-destructable. Nevertheless, when one of our engineers was visiting one of our customers, a refinery on the east coast, he was surprised when he was handed a fire extinguisher that had been run over by a van and that it was still fully pressurised!

crushed-p50-1crushed-p50-2crushed-p50-3

This is not that surprising when you know that 1 in 500 of these extinguishers are tested by pressurising them 12,000 times from zero bar to 25 bar. And after they have undergone this harsh test, they are crushed flat by a steel blade before being re-inflated without being allowed to leak at 55 bar!

The P50 service free extinguisher is suitable for the harshest of environments, including outdoors.

P50 Popular at FM Show at NEC

Thursday 30th May 2013

The P50 service free extinguisher turned more than a few heads on the Safelincs stand at the recent Facilities Show at the National Exhibition Centre in Birmingham.

Facilities managers who attend the annual event are always looking for innovative ways to cut costs and provide better service for their clients. They didn’t take much persuading to see the benefits and potential savings offered by the P50.

P50-at-the-FM-trade-show

Traditional extinguishers require servicing each year but P50s are constructed using a composite material that will not rust or corrode. This protects the contents and no discharge testing or refills are required for ten years. The expensive annual service by an external engineer is no longer necessary– just a straightforward yearly test that can easily be carried out by an organisation’s in-house staff.

After ten years the P50s can be refilled and used for a further ten years.

Safelincs’ managing director, Harry Dewick-Eisele was at the show and had the opportunity to speak to many facilities managers. “Those with responsibility for large estates could see savings running into thousands of pounds,” he said. “A good number were going back to their offices to weigh up how quickly they could replace their existing appliances and start cutting costs.”