Fire Exit Door Security Seal (Pack of 10)

Temporarily Unavailable

This product is temporarily unavailable and is not currently available to buy. View similar products: Fire Exit Door Security.

View alternative products

Fire Exit Door Security

Fire exit door alarms & anti-tamper devices discourage unauthorized use of fire exit doors & can offer warning of misuse to staff.

View Products

Product Overview
Technical Data
FAQs (4)

Product Overview

The security seal is designed to be looped around e.g. a panic bar on an emergency exit door and an eye bolt or bracket on the frame / wall and is closed in the same way as a cable tie. When the door is used, the individually numbered seal rips, indicating unauthorised use. It adds additional security and acts as a deterrent but can be easily broken when the panic bar is pushed open in a real emergency.

Easily identifiable if fire exits have been tampered with
All individually coded to prevent a replacement cover-up
Discourages use of fire doors in non-emergency situations
Average break strength: 17kgf
Usable strap length: 180mm
Minimum aperture: 3 x 2.25mm
Sold in strips of 10
For optimum performance store at room temperature before use
Exact appearance may vary from image shown

Technical Data

Product Code	FDSTSG
Alternative Product Codes	SFD100, SFD1, FDS/GREEN, HS/SF/FDS/G
Brand	Cherry Parts
Breaking Force	17kgf
Dimensions (L)	Usable length: 180mm
Dimensions (WxD)	Minimum aperture: 3 x 2.25mm
Material	Polypropylene
Weight	0.10kg

FAQs (4)

Q. Are the fire exit door security seals suitable to use on double fire exit doors in premises such as a church hall, the fire door is always being left open?

The security seal is designed to be looped round the panic bar or bars of the fire exit. It is attached similar to a cable tie and can be broken easily in the event of a fire but acts as a deterrent for anyone using the door as a normal exit door.

Q. How are the Fire Exit Door Security Seals attached to the door?

The security seal is looped around the panic bar on the emergency exit, similar to a cable tie. The seal can easily be broken when the panic bar is pushed to open the doors.

Q. Is it possible to hook a small padlock through the end of a Fire Exit Door Security Seal so it can be removed if the fire door is used legitimately (not in an emergency)?

Yes, there are several ways this can be done. For double doors the padlock can be attached to one of the door panic bars and the security seal to the other. The padlock is them looped through the closed security seal. For a single door a means of fixing the padlock to the frame is required. The security seal is then attached to the panic bar and the padlock is hooked through this.

Q. Do the Fire Exit Door Security Seals conform to BS8300 Disabled Access?

Although the average break strength is only 10.5kg and thus allow the door to be opened with only a little force the security seal does not conform to BS8300.