Touch Bar Panic Bar with Latch/Bolt - 1 and 3 Point Locking - Securefast

The Securefast touch bar panic latch/bolt has less than 100mm projection making it ideal for applications where space is limited. Available with 1 or 3 point locking the touchbar is suitable for most applications, and can be used on its own or in conjunction with the touchbar outside access device. Ideal for use in public access buildings, when the touch bar is pressed, each latch retracts and releases the fire exit door.

• Press bar hardware with latches and vertical bolt (dependent on model purchased)
• Suitable for use on single doors and the inactive leaf of rebated double doors
• 10 Year Warranty
• High resistance to corrosion
• Tested to 1,500,000 cycles
• Fire rated for timber and steel doors in accordance with EN1634-1
• Concealed vertical rods (3 point locking version only)
• Designed for use in public access buildings where a panic situation may occur in an emergency
• Non-handed - will suit both left and right handed door
• Suitable for doors up to 2500mm high and 1300mm wide
• CE marked
• Available in 2 versions:
  • 1 point locking: 1 x anti-thrust centre latch
  • 3 point locking: 1 x anti-thrust centre latch and 2 x horizontal pullman latches
• Designed to comply with the requirements of BS EN 1125:2008
• EN 1125: 2008 Classification code:37601422AA

The table below shows the outside access devices suitable for use in conjunction with the touch bar panic bar with latch/bolt from Securefast.