You should always test your CO alarm in accordance with the manufacturer's recommendations in the manual the alarm was supplied with. Many manufacturers state their alarms should only be tested by using the built-in test functionality, and while others do allow "functional testing" this is usually with the requirement that it is performed by a professional or competent person. Functional testing includes exposing CO alarms to real or synthetic carbon monoxide, such as the Solo C6 and FireAngel Easy Gas test sprays.
The Solo C6 carbon monoxide testing spray has been designed for use on domestic CO alarms as opposed to the C3 which is manufactured primarily for commercial CO fire detectors. However, the manual supplied with the C6 states that it is for professional use only. This is due to several factors including manufacturer requirements, as explained above, and the fact that test sprays are easy to use incorrectly if you do not have the appropriate equipment and training.
If you are unsure if the C6 is suitable for use on your CO alarm you should contact the manufacturer for advice.
[showInJargonBuster] => N [jargonBuster] => [metaDescription] => [metaKeywords] => [CSS] => [TopBar] => [snippetType] => 2 )