Array
(
    [name] => DorgardNightTimeRelease
    [title] => Automatic Night Time Release
    [content] => <p>The Dorgard can be used to hold open fire doors 24 hours a day, however, it is recommended that fire doors are closed at night if the building is unoccupied.</p>
<p>To allow fire doors to be automitcally released at night, the Dorgard can be set to release at a pre-set time and will then not operate as a hold-open device until the following morning.</p>
<p>The available night time release options are:</p>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
  <tr>
    <td><strong>Dip Switch 1</strong></td>
    <td><strong>ON</strong> = Release at 20:00hrs - Operational 08:00hrs</td>
  </tr>
  <tr>
    <td><strong>Dip Switch 2</strong></td>
    <td><strong>ON</strong> = Release at 21:00hrs - Operational 07:00hrs</td>
  </tr>
  <tr>
    <td><strong>Dip Switch 1 & 2</strong></td>
    <td><strong>ON</strong> = Release at 22:00hrs - Operational 06:00hrs</td>
  </tr>
  <tr>
    <td><strong>Dip Switch 3</strong></td>
    <td><strong>ON</strong> = Disabled night time release warning tone</td>
  </tr>
  <tr>
    <td><strong>Dip Switch 4</strong></td>
    <td><strong>No</strong> function available</td>
  </tr>
</table>
<p>To use the night time realease function, the Dorgard's internal clock needs to be set by inserting the batteries at 12:00 noon. Otherwise the Dorgard will release at the wrong times. The dip swith selections should be made prior to installation.</p>
    [jargonBuster] => 
    [metaDescription] => 
    [metaKeywords] => 
    [CSS] => 
    [TopBar] => 
    [snippetType] => 2
)