Array
(
    [name] => FirecoProInSite
    [title] => Fireco Pro Range InSite Cloud Portal
    [content] => <p>InSite is a cloud-based package for the Fireco Pro Range system, allowing all Internet-enabled ProHubs and their connected Pro Range fire door closers and retainers to be monitored and controlled remotely. There is no complicated software installation or network configuration required – simply connect the ProHub via Ethernet or WiFi (with WPA2 security) and login to the InSite portal in any web browser, even on mobile devices.</p>
<p>The web portal shows the serial number, a free-text name / description field (excellent for noting the location e.g. Floor 4 Stairwell), installation date, and next inspection date, along with the status of all connected devices:</p>
<ul>
<li>ProHub devices:
<ul>
<li>Fire activation</li>
<li>Firmware version</li>
<li>Input voltage</li>
</ul>
</li>
<li>Dorgard Pro & Freedor Pro:
<ul>
<li>Open / closed indication</li>
<li>Signal strength</li>
<li>Battery level</li>
<li>Fault status</li>
</ul>
</li>
</ul>
<p>Connected Dorgard Pro and Freedor Pro devices can be controlled from the portal, either by timer schedules or manual release. Timers can be programmed per ProHub via a weekly schedule for when all connected devices will or will not hold open, with date-specific overrides available if specific events will require different open and closing times. Manual control can be done individually by clicking a single device's icon or in bulk by clicking the icon of the ProHub they are connected to. Closers and retainers released manually will refuse to hold doors open until reset either via the same method as releasing them through the portal, after the next fire alarm test, or according to your timer configruation.</p>
    [showInJargonBuster] => N
    [showInSearch] => N
    [jargonBuster] => 
    [metaDescription] => 
    [metaKeywords] => 
    [CSS] => 
    [TopBar] => 
    [snippetType] => 2
)