Array
(
    [name] => InvestigationDelayPeriod
    [title] => Investigation Delay Period Function
    [content] => Programmable for length of time, which zone(s) it applies to and whether or not it operates in day/night mode.  When there is an alarm in a zone programmed to operate in 'investigate' mode, the full alarm condition will occur after a delay. It is possible to manually impose a further delay, to allow the source of the alarm to be investigated.  If the second delay expires, or there is another alarm in the same zone, then a full alarm condition is established.  During either delay period, the panel may be reset in the case of a false alarm.
    [jargonBuster] => 
    [metaDescription] => 
    [metaKeywords] => 
    [CSS] => 
    [TopBar] => 
    [snippetType] => 2
)