Array
(
    [name] => KiddeSlickInformation
    [title] => Kidde Slick Information
    [content] => <h1>Kidde Slick Mains Powered Smoke and Heat Alarms</h1>
<p style="margin: 0 0 12px 0;">The Kidde Slick mains powered smoke and heat alarms fully conform to BS5839-6:2004 Grade D, E and F and are available in 3 versions:</p>
<div class="slick-series">
<h2>Mains Ionisation Alarm with Backup Battery</h2>
<img class="trade-image" src="/templates_kidde/slick-pressentations/kidde-slick-1sfw-ionisation-smoke-alarm.jpg" />
<h3>Available Models:</h3>
<ul>
<li>Kidde 1SFW</li>
<li>Kidde 1SFWR*</li>
</ul>
<p class="ionisation"><a href="javascript: void(0)" title="Delivery" rel="scrollTo">See Technical Specifications</a></p>
</div>

<div class="slick-series">
<h2>Mains Optical Alarm with Backup Battery</h2>
<img class="trade-image" src="/templates_kidde/slick-pressentations/kidde-slick-2sfw-optical-smoke-alarm.jpg" />
<h3>Available Models:</h3>
<ul>
<li>Kidde 2SFW</li>
<li>Kidde 2SFWR*</li>
</ul>
<p class="optical"><a href="javascript: void(0)" title="Delivery" rel="scrollTo">See Technical Specifications</a></p>
</div>

<div class="slick-series" style="margin: 0 0 14px 0">
<h2>Mains Heat Alarm with Backup Battery</h2>
<img class="trade-image" src="/templates_kidde/slick-pressentations/kidde-slick-3sfw-heat-alarm.jpg" />
<h3>Available Models:</h3>
<ul>
<li>Kidde 3SFW</li>
<li>Kidde 3SFWR*</li>
</ul>
<p class="heat"><a href="javascript: void(0)">See Technical Specifications</a></p>
</div>
<div class="rechargable-message">
	<p>*The "R" suffix indicates the unit is supplied with a rechargeable backup battery. The standard units are supplied with user replaceable alkaline batteries.</p>
</div>

<div id="page-tabs">
    <ul>
      <li><a href="#IonisationSpecs" id="IonisationSpecs" class="pageTab">1SFW(R) Specification</a></li>
      <li><a href="#OpticalSpecs" id="OpticalSpecs" class="pageTab">2SFW(R) Specification</a></li>
      <li><a href="#HeatSpecs" id="HeatSpecs" class="pageTab">3SFW(R) Specification</a>
    </ul>
    <div class="clear_both"></div>
  </div>

<div id="IonisationSpecsContent" class="product-content tab-content">
<h2>Technical Specifications for the Kidde 1SFW and 1SFWR</h2>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
  <tr>
    <th>Sensor</th>
    <td>Ionisation, metallic chamber with 24 number slot entry inlet portals </td>
  </tr>
  <tr>
    <th>Sensitivity</th>
    <td>Complies with BS EN 14604: 2005 </td>
  </tr>
  <tr>
    <th>Source</th>
    <td>Americium 241 (0.9 Micro curie) </td>
  </tr>
  <tr>
    <th>Button Test </th>
    <td>Simulates the effect of smoke within the sensing chamber, checks electronics and sounder </td>
  </tr>
  <tr>
    <th>Automatic Self Test </th>
    <td>Circuitry is tested every 40 seconds and unit beeps if fault is detected </td>
  </tr>
  <tr>
    <th>Supply Voltage</th>
    <td>230V AC, 50Hz (Nominal UK Voltage) </td>
  </tr>
  <tr>
    <th>Power Consumption </th>
    <td>Maximum 80 mA </td>
  </tr>
  <tr>
    <th>Battery back-up </th>
    <td>
			<ul>
			<li><strong>1SFW</strong>- Alkaline Battery 9V MX1604</li>
      <li><strong>1SFWR</strong>- Lithium Polymer Rechargeable Battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Battery Monitoring </th>
    <td>Battery is monitored and unit emits a single chirp beep every 40 seconds if a fault is present </td>
  </tr>
  <tr>
    <th>Power-on Indicator </th>
    <td>Continuous green LED </td>
  </tr>
  <tr>
    <th>Alarm</th>
    <td>Electronic Piezoelectric sounder, (providing sound 3 pulses; space 3 pulses in alarm state) </td>
  </tr>
  <tr>
    <th>Alarm Sound output </th>
    <td>85dB (A) (minimum) at 3m </td>
  </tr>
  <tr>
    <th>Alarm Frequency </th>
    <td>3.2 KHz typical </td>
  </tr>
  <tr>
    <th>Alarm Status </th>
    <td><ul>
      <li>RED LED flashes rapidly indicating unit sensing fire event, rate typically once every 2 / 3 seconds</li>
      <li>RED LED double flashes every 30 seconds to indicate the unit is the triggering unit (LED flashes until button pressed)</li>
      <li>RED LED flashes once every 10 seconds to indicate in hush condition, auto reset after 7 minutes </li>
    </ul></td>
  </tr>
  <tr>
    <th>Normal operating Temperature Range </th>
    <td>0 - 40°C </td>
  </tr>
  <tr>
    <th>Humidity Range </th>
    <td>Up to 93% Relative Humidity (RH) </td>
  </tr>
  <tr>
    <th>Interconnect</th>
    <td>Up to 24 units can be interconnected including: 
			<ul>
				<li>1SFW, 1SFWR</li>
			  <li>2SFW, 2SFWR</li>
			  <li>3SFW, 3SFWR</li>
			  <li>423/9HIR, 423D/9HIR CO alarm (hard wire, non-slick base) </li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Fixing</th>
    <td>Slick mounting base as supplied (deep base) </td>
  </tr>
  <tr>
    <th>Base Cable Connections </th>
    <td>Screw-less terminal block with slot release feature for conductors </td>
  </tr>
  <tr>
    <th>Dimensions</th>
    <td>135mm diameter x 60mm depth (with slick mounting) </td>
  </tr>
  <tr>
    <th>Guarantee</th>
    <td>
			<ul>
			<li><strong>1SFW</strong>- 6 year excluding battery</li>
      <li><strong>1SFWR</strong>- 10 year including back-up battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Approvals</th>
    <td>Kite marked to BSEN 14604:2005 (Licence no. KM524754) and CE tested and certified </td>
  </tr>
  <tr>
    <th>Associated Standards </th>
    <td>BS5839 Part 6 Grade D </td>
  </tr>
</table>
</div>

<div id="OpticalSpecsContent" class="product-content tab-content">
<h2>Technical Specifications for the Kidde 2SFW and 2SFWR</h2>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
  <tr>
    <th>Sensor</th>
    <td>Optical chamber with insect resistant width slot </td>
  </tr>
  <tr>
    <th>Chamber size </th>
    <td>41mm diameter by 16mm approximately </td>
  </tr>
  <tr>
    <th>Sensitivity</th>
    <td>Complies with BS EN 14604: 2005 </td>
  </tr>
  <tr>
    <th>Detection Band </th>
    <td>Infrared light wavelength </td>
  </tr>
  <tr>
    <th>Button Test </th>
    <td>Simulates the effect of smoke within the sensing chamber, checks electronics and sounder </td>
  </tr>
  <tr>
    <th>Automatic Self Test </th>
    <td>Circuitry is tested every 40 seconds and unit beeps if fault is detected </td>
  </tr>
  <tr>
    <th>Supply Voltage</th>
    <td>230V AC, 50Hz (Nominal UK Voltage) </td>
  </tr>
  <tr>
    <th>Power Consumption </th>
    <td>Maximum 80 mA </td>
  </tr>
  <tr>
    <th>Battery back-up </th>
    <td>
			<ul>
			<li><strong>2SFW</strong>- Alkaline Battery 9V MX1604</li>
      <li><strong>2SFWR</strong>- Lithium Polymer Rechargeable Battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Battery Monitoring </th>
    <td>Battery is monitored and unit emits a single chirp beep every 40 seconds if a fault is present </td>
  </tr>
  <tr>
    <th>Power-on Indicator </th>
    <td>Continuous green LED </td>
  </tr>
  <tr>
    <th>Alarm</th>
    <td>Electronic Piezoelectric sounder, (providing sound 3 pulses; space 3 pulses in alarm state) </td>
  </tr>
  <tr>
    <th>Alarm Sound output </th>
    <td>85dB (A) (minimum) at 3m </td>
  </tr>
  <tr>
    <th>Alarm Frequency </th>
    <td>3.2 KHz typical </td>
  </tr>
  <tr>
    <th>Alarm Status </th>
    <td><ul>
      <li>RED LED flashes rapidly indicating unit sensing fire event, rate typically once every 2 / 3 seconds</li>
      <li>RED LED double flashes every 30 seconds to indicate the unit is the triggering unit (LED flashes until button pressed)</li>
      <li>RED LED flashes once every 10 seconds to indicate in hush condition, auto reset after 7 minutes </li>
    </ul></td>
  </tr>
  <tr>
    <th>Normal operating Temperature Range </th>
    <td>0 - 40°C </td>
  </tr>
  <tr>
    <th>Humidity Range </th>
    <td>Up to 93% Relative Humidity (RH) </td>
  </tr>
  <tr>
    <th>Interconnect</th>
    <td>Up to 24 units can be interconnected including: 
			<ul>
				<li>1SFW, 2SFWW</li>
			  <li>2SFW, 2SFWR</li>
			  <li>3SFW, 3SFWR</li>
			  <li>423/9HIR, 423D/9HIR CO alarm (hard wire, non-slick base) </li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Fixing</th>
    <td>Slick mounting base as supplied (deep base) </td>
  </tr>
  <tr>
    <th>Base Cable Connections </th>
    <td>Screw-less terminal block with slot release feature for conductors </td>
  </tr>
  <tr>
    <th>Dimensions</th>
    <td>135mm diameter x 60mm depth (with slick mounting) </td>
  </tr>
  <tr>
    <th>Guarantee</th>
    <td>
			<ul>
			<li><strong>2SFW</strong>- 6 year excluding battery</li>
      <li><strong>2SFWR</strong>- 10 year including back-up battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Approvals</th>
    <td>Kite marked to BSEN 14604:2005 (Licence no. KM524754) and CE tested and certified </td>
  </tr>
  <tr>
    <th>Associated Standards </th>
    <td>BS5839 Part 6 Grade D </td>
  </tr>
</table>
</div>

<div id="HeatSpecsContent" class="product-content tab-content">
<h2>Technical Specifications for the Kidde 3SFW and 3SFWR</h2>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
  <tr>
    <th>Sensor</th>
    <td>Thermistor (Thermal resistor) within detection unit </td>
  </tr>
  
  <tr>
    <th>Sensitivity</th>
    <td>Complies with BS 5446 Pt 2. 2003 as a Class A2 device </td>
  </tr>
  
  <tr>
    <th>Button Test </th>
    <td>Simulates the effect of heat at the sensor, checks electronics and sounder </td>
  </tr>
  <tr>
    <th>Automatic Self Test </th>
    <td>Circuitry is tested every 40 seconds and unit beeps if fault is detected </td>
  </tr>
  <tr>
    <th>Supply Voltage</th>
    <td>230V AC, 50Hz (Nominal UK Voltage) </td>
  </tr>
  <tr>
    <th>Power Consumption </th>
    <td>Maximum 80 mA </td>
  </tr>
  <tr>
    <th>Battery back-up </th>
    <td>
			<ul>
			<li><strong>3SFW</strong>- Alkaline Battery 9V MX1604</li>
      <li><strong>3SFWR</strong>- Lithium Polymer Rechargeable Battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Battery Monitoring </th>
    <td>Battery is monitored and unit emits a single chirp beep every 40 seconds if a fault is present </td>
  </tr>
  <tr>
    <th>Power-on Indicator </th>
    <td>Continuous green LED </td>
  </tr>
  <tr>
    <th>Alarm</th>
    <td>Electronic Piezoelectric sounder, (providing sound 3 pulses; space 3 pulses in alarm state) </td>
  </tr>
  <tr>
    <th>Alarm Sound output </th>
    <td>85dB (A) (minimum) at 3m </td>
  </tr>
  <tr>
    <th>Alarm Frequency </th>
    <td>3.2 KHz typical </td>
  </tr>
  <tr>
    <th>Alarm Status </th>
    <td><ul>
      <li>RED LED flashes rapidly indicating unit sensing fire event, rate typically once every 2 / 3 seconds</li>
      <li>RED LED double flashes every 30 seconds to indicate the unit is the triggering unit (LED flashes until button pressed)</li>
      <li>RED LED flashes once every 10 seconds to indicate in hush condition, auto reset after 7 minutes </li>
    </ul></td>
  </tr>
  <tr>
    <th>Normal operating Temperature Range </th>
    <td>0 - 40°C </td>
  </tr>
  <tr>
    <th>Humidity Range </th>
    <td>Up to 93% Relative Humidity (RH) </td>
  </tr>
  <tr>
    <th>Interconnect</th>
    <td>Up to 24 units can be interconnected including: 
			<ul>
				<li>1SFW, 2SFWW</li>
			  <li>2SFW, 2SFWR</li>
			  <li>3SFW, 3SFWR</li>
			  <li>423/9HIR, 423D/9HIR CO alarm (hard wire, non-slick base) </li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Fixing</th>
    <td>Slick mounting base as supplied (deep base) </td>
  </tr>
  <tr>
    <th>Base Cable Connections </th>
    <td>Screw-less terminal block with slot release feature for conductors </td>
  </tr>
  <tr>
    <th>Dimensions</th>
    <td>135mm diameter x 89mm depth approximately (with slick mounting) </td>
  </tr>
  <tr>
    <th>Guarantee</th>
    <td>
			<ul>
			<li><strong>3SFW</strong>- 6 year excluding battery</li>
      <li><strong>3SFWR</strong>- 10 year including back-up battery</li>
			</ul>		</td>
  </tr>
  <tr>
    <th>Approvals</th>
    <td>Kite marked to BS 5446 Pt2. 2003 (Licence no. KM503753) and CE tested and certified </td>
  </tr>
  <tr>
    <th>Associated Standards </th>
    <td>BS5839 Part 6 Grade D </td>
  </tr>
</table>
</div>
    [jargonBuster] => 
    [metaDescription] => 
    [metaKeywords] => 
    [CSS] => .slick-series {
float: left; 
border: 1px dashed #CCCCCC; 
width: 288px;
padding: 14px;
margin: 0 12px 14px 0;
}

.slick-series img {
margin: 0 34px;
} 

.slick-series h2 {
margin: 0 0 18px 0;
text-align: center;
}

.slick-series h3 {
margin: 10px 0;
}

.slick-series ul {
padding: 0 0 0 20px;
margin: 0 0 14px 0;
}

.slick-series ul li {
padding: 0 0 4px 0;
}

.rechargable-message {
clear: both;
border: 1px dashed #CCCCCC; 
padding: 14px;
margin: 0 0 14px 0;

}

table td ul {
padding: 0 0 0 20px;
}
    [TopBar] => 
    [snippetType] => 1
)