Array
(
    [name] => Stopper2Fitting
    [title] => Stopper 2 Fitting Instructions
    [content] => <ul>
	<li>Position the Stopper frame centrally over the device to be protected, and mark the position for the four fixing screws.</li>
	<li>Drill the holes, assemble the frame and hinge mechanism and fit the Stopper with the wall fixings and screws provided.</li>
	<li>If a surface spacer is included, ensure that the plastic lip of the spacer is pointing upwards. This will provide a base for the hinge (see diagram below).</li>
	<li>Ensure the deactivation pin is removed from the alarm unit on those fitted with integral sounder. The pin should be retained, in the event any maintenance work is carried out.</li>
	<li>Where an optional weather gasket is positioned between the Stopper frame and spacer. Ensure the adhesive side of the weather gasket is fixed to the spacer and not the Stopper frame.</li>
</ul>
    [showInJargonBuster] => N
    [jargonBuster] => 
    [metaDescription] => 
    [metaKeywords] => 
    [CSS] => 
    [TopBar] => 
    [snippetType] => 3
)